Quick Answer: How To Play A 45 Rpm Record?
- 1 Can you play a 45 on a record player?
- 2 What does a 45 rpm adapter do?
- 3 How do you know what rpm to play a record?
- 4 Do I need a 45 RPM adapter?
- 5 Does 45 RPM sound better?
- 6 What is a 45 rpm record adapter called?
- 7 Are 45 records worth anything?
- 8 Why did 45 have a big hole?
- 9 Does playing a record at the wrong speed damage it?
- 10 How long is a 45 rpm record?
- 11 Why do records play at 33 rpm?
- 12 What is the difference between a 33 and a 45 record?
- 13 What records can I play on my Victrola?
Can you play a 45 on a record player?
Each adapter allows you to play 45 RPM singles on almost any record player. The adapters are easy to use, simply snap it into the center of the 7″ record and place on the turntable spindle – no tools are required!
What does a 45 rpm adapter do?
A 45 rpm adapter (also 45 rpm record insert, or 45 rpm spindle adapter) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it will play on a turntable.
How do you know what rpm to play a record?
The LP jacket or a sticker on the package usually indicates if a 12 ” or 10” LP is cut at 45 rpm. Smaller 7” records are cut at 45 rpm and usually have one song per side. If you play a 45 rpm 7” or 12” record at 33 1/3 on your turntable, it will sound too slow.
Do I need a 45 RPM adapter?
In order to play a 45 RPM record that has a 1.5-inch hole, you must use an adapter that has an outside diameter of 1.5 inches and a 0.25-inch hole in the center. Please note that a 45 RPM record with a 0.25-inch hole does not need an adapter and should be placed over the turntable’s spindle-like a 33-1/3 RPM record.
Does 45 RPM sound better?
Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality.
What is a 45 rpm record adapter called?
The Spider The former RCA Corporation introduced a snap-in plastic insert known as a spider to make 45 rpm records compatible with the smaller spindle size of a 33⅓ rpm LP record player.
Are 45 records worth anything?
Part 1 of 3: Look for rock and roll and R&B 45s and EPs with original sleeves, or first pressings of albums. Rock and roll and R&B 45s with the cardboard sleeves are worth at least $20, with many being worth more than $200. First pressings of albums have more value than second, third, or subsequent pressings.
Why did 45 have a big hole?
When a new 45 dropped from the spindle onto the turntable, it was required to spin up from a dead stop to 45 RPM very quickly. This torque tended to cause the small holes to go out-of-round very quickly, causing record to wobble as it spun. It’s simply called a “45 rpm record adapter.”
Does playing a record at the wrong speed damage it?
Playing vinyl records at the wrong speed does not do any damage. The audio will not sound as intended, but there will be no lasting extra damage if the standard RPM speeds are used.
How long is a 45 rpm record?
7 inch records (also called “45s”) are referred to by their playback speed of 45 rpm and their standard diameter of 7 inches. At 45 rpm they hold around 4-6 minutes per side. 45 rpm is the most common speed for 7 inch records.
Why do records play at 33 rpm?
rpm spread across the oceans in the late 1940s as people wanted longer playing time than 78 rpm records could offer. In the 33? rpm records, the grooves were 2 thousandth of an inch and the smaller radius of the newly introduced cartridges allowed a full frequency recording at 33 rpm.
What is the difference between a 33 and a 45 record?
33 RPM will generally lead to more playtime fitting on a record side. Going with 45 RPM will generally lead to playtime and low production costs being sacrificed for more audio quality. This is due to the fact that a higher speed allows the recording to fit more sound information in each second.
What records can I play on my Victrola?
ANSWER: Victors and Victrolas will play any laterally-cut 78 RPM record. This would include most flat shellac records, with the exception of some early Edison and Pathe discs, which used a vertical cutting method.